Click to view larger Separate Surface Roughness Tester SRT-6200S picture
The product information is provided by Guangzhou Landtek Instruments Co. Ltd. Post.
Flat C,Kengkou Electronic Base,No.9 Huaxi Rd.Fangcun,guangzhou 510380 P.R.China
Measure surface roughness of:various machinery-processed parts.
Calculate correspondingparameters according to selected measuring conditions and clearly display all measurement parameters.
* Be compatible with four standards of ISO, DIN, ANSI and JIS.
* Multiple parameter measurement: Ra, Rz, Rq, Rt.
* Highly sophisticated inductance sensor.
* Four wave filtering methods : RC, PC-RC, GAUSS and D-P.
|Display||4 digits, 10 mm LCD, with blue backlight|
Ra , Rq : 0.05~10.00 um / 1.000~400.0 uinch
Rz , Rt : 0.020~100.0 um / 0.780~4000 uinch
|Accuracy||≤ ± 10%|
|Fluctuation of display value||Not more than 6%|
|Sensor||Test Principle||Inductance type|
|Radius of Probe Pin||10 um|
|Material of Probe Pin||Diamond|
|Measurement Force of Probe||16 mN（1.6 gf）|
|Vertical Radius of Guiding Head||48 mm|
|Maximum driving stroke||17.5 mm / 0.7 inch|
|Cutoff length (l)||0.25 mm / 0.8 mm / 2.5 mm optional|
|Driving speed||Sampling||When Length = 0.25 mm, Vt = 0.135 mm/s|
|When Length = 0.8 mm, Vt = 0.5 mm/s|
|When Length = 2.5 mm, Vt = 1 mm/s|
|Returning||Vt = 1 mm/s|
|Resolution||0.001 um, if reading ＜ 10um|
|0.01 um, if 10um ≤ reading ≤ 100um|
|0.1 um, if reading ≥ 100um|
|evaluation length||1~5 L optional|
|Auto Power Off|
|Operating conditions||Temperature: 0~50 ℃ Humidity: ＜ 80 %RH|
|Power Supply||4 x 1.5v AAA size (UM-4) battery|
|Dimensions||Main Unit||149 x 67 x 29 mm|
|Measuring base||185 x 56 x 47 mm|
*When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester.
*The sensor gets the surface roughness by the sharp built-in probe.
*This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier.
*The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
1. Main Unit
2. Small Screwdriver
3. Measuing base
4. Adjustable Stand
5. Standard Sample Plate
6. Standard Sensor
7. Carrying Case
8. Instruction Manual
1. Groove Stylus SRP-110
2. Curvature Probe SRP-120
3. Extension Rod SER-150
4. Measurement Stand SRS-1
5. USB, RS-232C data cable with software
6. Bluetooth data out put with software
For more details,please feel free to contact us.Thank you!
Message notice: the above display information provided by the members themselves, the authenticity of the content, accuracy and validity of release of the member responsible for, recommend that you purchase related products must be confirmed before the supplier qualification and product quality.。